德國BURKERT升降式銜鐵閥 0312系列
流體和環境溫度:
用于危險區域事業部。 1(T4額定)
zui大。環境溫度104°F(40°C)
zui大。流體溫度194°F(90℃)
用于危險區域事業部。 1(T6額定)
zui大。環境溫度104°F(40°C)
zui大。流體溫度140°F(60°C)
Fluid and Ambient Temperature:
For Hazardous Locations Div. 1 (T4 rated)
Max. Ambient Temperature 104 °F (40 °C)
Max. Fluid Temperature 194 °F (90 °C)
For Hazardous Locations Div. 1 (T6 rated)
Max. Ambient Temperature 104 °F (40 °C)
Max. Fluid Temperature 140 °F (60 °C)
德國BURKERT升降式銜鐵閥 0312系列
安裝方式:
在安裝閥門前確保管道等是免費的國外
物(金屬填充物,密封材料,焊接等)。安裝
作為必需的,但用線圈向上。安裝
在這個位置上趨于防止異物殘留在芯
管(增加生命)。不要把線圈單元的任何負載。
0311類型:PTFE膠帶建議密封端口。
安裝件由四個M4毫米x 8毫米的手段來實現竊聽
孔位于閥側。
0312類型:端口A(B)編碼對身體的一側。對于常見
壓力,對準“A(B)”標志的閥門和歧管。閥門
操作C和D閥不能管道連接在一起的。
請從歧管松動只有兩個螺絲啟封閥。
歧管可連接togehter與乳頭
Installation:
Before installing valve ensure that piping etc. is free of foreign
matter (metal fillings, seal materials, welding scale etc.). Installation
as required but preferably with coil uppermost. Installation
in this position tends to prevent foreign matter remaining in core
tube (increased life). Do not put any loads on coil unit.
Type 0311: PTFE tape is recommended for sealing ports.
Mounting is accomplished by means of four M4 x 8 mm tapped
holes located on the valve underside.
Type 0312: Ports A (B) are coded on side of body. For common
pressure, align "A (B)" marking on valve and manifold. Valve
operation C and D valves cannot be manifolded together. To
remove valve from manifold loosen only the two unsealed screws.
Manifolds can be connected togehter with nipples