橡膠接頭、可曲撓橡膠接頭，避震喉安裝壓力測試

可曲撓橡膠接頭的壓力是否能達到管道的壓力，要先用試壓儀器對橡膠軟連接進行試壓，

方法是：

將平置的橡膠接頭一端裝在帶排氣閥的平面法蘭上，另一端裝在帶導氣筒的平面法蘭蓋上，與施壓出口管相連接，然后固定在試驗臺上，啟動試壓泵，將水或其他適用的介質充入橡膠接頭內排凈空氣，關閉排氣閥，停泵。調整試樣位置并將其固定，測量并記錄試樣的初始長度。

橡膠接頭球體及法蘭都無問題的話，表示可曲撓橡膠接頭的壓力安全無問題。

本文圖片、文字由上海淞江集團提供。有疑問請

??

Rubber joint, flexible rubber joint, shock proof box mounting pressure testing

The pressure of the flexible rubber joint can reach the pressure of the pipeline, and the pressure test instrument is used to test the pressure of the rubber soft connection,

Method is:

The horizontal rubber joint is arranged on the plane flange of the exhaust valve, another end is installed on the belt guide cylinder plane flange cover, and put pressure on the outlet pipe is connected and fixed on the test bench, start pressure test pump, water or other suitable medium filled into rubber joint row net air, exhaust valve closed, stop the pump. Adjust the position of the sample and fix it, measure and record the initial length of the sample.

There is no problem in the sphere and the flange of the rubber joint, which indicates that the pressure of the flexible rubber joint is safe and has no problem.

This picture, written by Shanghai Songjiang group of high temperature resistant rubber joints http://www.60547771。。ｃｏｍ/.