進口單級單吸離心泵是在德國漢克(HANK)*技術的基礎上，采用國際通用離心泵之性能參數，自行研制開發的新一代節能、環保臥式離心泵。該系列泵性能優、可靠性高、壽命長、結構合理、 外形美觀，具有行業水平。
主要用途
1、供輸送清水及物理化學性質類似于清水的其他液體之用，適用于工業和城市給排水，高層建筑增壓送水，園林噴灌，消防增壓，遠距離輸送，暖通制冷循環、浴室等冷暖水循環增壓及設備配套，使用溫度T≤80℃。
2、適用于：冶金、化工、紡織、造紙、以及賓館飯店等鍋爐熱水增壓循環輸送及城市采暖系統，使用溫度T≤120℃。
3、供輸送不含固體顆料，具有腐蝕性，粘度類似于水的液體，適用于石油、化工、冶金、電力、造紙、食品制藥和合成纖維等部門，使用溫度為-20~C～+120℃。
4、供輸送汽油、煤油、柴油等用油類產品或易燃、易爆液體，被輸送介質溫度為一20~C～+120℃。
工作條件
1、吸入壓力≤1．6MPa，或泵系統工作壓力≤1．6MPa，即泵吸入口壓力+泵揚程≤1．6MPa、泵靜壓試驗壓力為2．5MPa。泵系統工作壓力大于1．6MPa時應在訂貨時另行提出，以便在德國漢克(HANK)工廠制造時泵的過流部分和聯接部分采用鑄鋼材料。
2、環境溫度<40℃，相對濕度<95％。
3、所輸送介質中固體顆粒體積含量不超過單位體積的0．1％，粒度<0．2mm。
注：如使用介質為帶有細小顆粒，請在訂貨時注明，以便廠家采用耐磨式機械密封。
產品特點
1、運行平穩：泵軸的同心度及葉輪優異的動靜平衡，保證平穩運行，*振動。
2、滴水不漏：不同材質的硬質合金密封，保證了不同介質輸送均無泄漏。
3、噪音低：兩個低噪音軸承支撐下的水泵，運轉平穩，除電機微弱聲響，基本無噪音。
4、故障率低：結構簡單合理，關鍵部分采用；配套，整機*工作時間大大提高。
5、維修方便：更換密封、軸承，簡易方便。
6、占地更?。撼隹诳上蜃?、向右、向上三個方向，便于管道布置安裝，節省空間。
Single-stage single-suction centrifugal pump is in Germany Hank (HANK) on the basis of advanced technology, the use of international common centrifugal pump performance parameters, developed a new generation of energy-saving, environmentally friendly horizontal centrifugal pump. The series of pump performance, high reliability, long life, reasonable structure, beautiful appearance, with industry-leading level.
The main purpose
1, for the delivery of water and physical and chemical properties similar to other liquids used in water, for industrial and urban water supply and drainage, high-rise building pressurized water, garden irrigation, fire booster, long-distance transport, HVAC refrigeration, Heating and water cycle pressurization and equipment support, the use of temperature T ≤ 80 ℃.
2, apply to: metallurgy, chemical, textile, paper, and hotel hotels such as boiler hot water pressurized circulation and urban heating system, the use of temperature T ≤ 120 ℃.
3, for the transport of non-solid particles, corrosive, viscosity similar to the liquid water, for petroleum, chemical, metallurgical, power, paper, food and synthetic fiber and other departments, the use of temperature -20 ~ 120 ° C.
4, for the delivery of gasoline, kerosene, diesel and other oil products or flammable, explosive liquid, the medium temperature is a 20 ~ C ~ +120 ℃.
Working conditions
1, suction pressure ≤ 1.6MPa, or pump system maximum working pressure ≤ 1.6MPa, that is, pump inlet pressure + pump head ≤ 1.6MPa, pump static pressure test pressure of 2.5MPa. Pump system working pressure greater than 1.6MPa should be made in the order, so that in Germany Hank (HANK) factory manufacturing pump part of the flow and the connection part of the use of cast steel.
2, ambient temperature <40 ℃, relative humidity <95%.
3, the volume of solid particles in the transport medium does not exceed 0.1% of the volume per unit volume, particle size <0.2mm.
Note: If the use of media with a small particle, please specify when ordering, so that manufacturers use wear-resistant mechanical seal.
Features
1, smooth operation: the absolute axis of the pump concentricity and impeller excellent static and dynamic balance, to ensure smooth operation, no vibration.
2, water leakage: different materials, carbide seal, to ensure that no leakage of different media delivery.
3, low noise: two low-noise bearings under the support of the pump, running smoothly, in addition to the motor faint sound, basically no noise.
4, the failure rate is low: the structure is simple and reasonable, the key part of the use of world-class quality; matching, machine trouble-free working hours greatly improved.
5, easy maintenance: replacement seals, bearings, simple and convenient.
6, covers a more provincial: exports can be left, right, up three directions, easy to install the pipeline installation, save space.
德國漢克（HANK）成立于1852年創建于門興格拉德巴赫（Monchengladbach）是位于德國北萊茵-威斯特州杜塞爾多夫市以西的一座城市。于19世紀50年代初德國經濟快速發展，由于德國能源短缺，政府在節能方面加大力度，因此HANK(Trouble Less pump*的水泵)公司成立。漢克水泵是以生產高品質、*的水泵、測量及控制系統而的跨國性生產企業，在幾十個國家擁有子公司及分支機構，公司產品涉及用途：石油、化工、電力、冶金、制藥、食品、水處理、市政給排水、天然氣、造紙、電子工業、樓宇、機械設備配套等領域。
GERMANY HANK PUMP LIMITED is founded on 1852 in Monchengladbach,which is located at one city in North Rhine in Germany, which is the west of Nordrhein-Westfalen. At the beginning of 1850s, as the rapid development of economic and the shortages of energy in Germany , the government had been in saving energy aspect. On this occasion, HANK Pump (Trouble Less Pump) was established.Hank pump is the world-famous transnational production enterprise,which produces high quality and advanced pump, measurement and control system, and which has its divisions and branches in dozens of countries in the global. The company products user involves the petroleum, the chemical industry, the electric power, the metallurgy, the drugs manufacture, food, the water treatment, the municipal administration to give draining water, the natural gas, the papermaking, the electronics industry, the building, the mechanical device necessary ect..
德國漢克（HANK）水泵的價值理念概括為：責任－遠見－創新。我們因自身的責任感、遠見及專注于創造的解決方案和理念，而成為的水泵制造商。
The conclusion of the pump concept in German Hank pump is resposibility,foresight,innovation. For ourselves resposibility, foresight and focusing on creating unprecendented solution and concept,our company has become the lead of pump manufacturer in the global.
