(米亞基逆變直流焊接電源氣缸加壓)SDZ-300B型 換向器自動點焊機
SDZ-300B DC output Automatic Commutator Spot Welding Machine
本機是專為電機換向器與電樞繞組連接的一種專用焊接設備。采用進口PLC控制器和觸摸屏顯示器控制焊機動作,在單個焊點可分別設定壓力,配置米亞基逆變焊機聯合控制、可定電流、定功率、定電壓等控制、多種焊接規范編號、多段通電方式。具有電流緩升、緩降功能。能通過各段焊接電流的合理選擇來達到高質量的焊接,工件機械定位對槽,可設定角度補償,配有內置冷卻水箱,進口電磁閥控制焊接氣缸,快速穩定,所有動作一次完成,操作簡單,性能*,焊接質量高。
The machine is designed for motor commutator and armature winding connection of a special welding equipment.The use of imported PLC controller and touch screen display control welding movements in a single solder joint can be set pressure, the configuration Miyaji inverter welding control, constant current, constant power, constant voltage control, a variety of welding specifications Number, multi-section power mode. With the current slow rise, slow down function. Can be selected by the reasonable choice of welding current to achieve high-quality welding, the workpiece mechanical positioning on the slot, can be set to the angle compensation, with built-in cooling water tank, import solenoid valve control welding cylinder, fast and stable, all actions once completed Simple, superior performance, high-quality welding.
技術參數/Technicai Parameters
電源電壓Supply voltage | AC380±10% 50Hz |
氣源壓力Air pressure | 0.5~0.7MPa |
逆變器Rectifier(可選Optional) | IPB-5000 / IS-300A |
短路電流Short Circuit Current | 5000A / 10000A |
可焊線徑Wire diameter | Φ0.12~0.5mm/Φ0.5~1.2mm |
轉子直徑Rotor Diameter | ≤Φ90mm |
軸徑Shaft diameter | ≤Φ17mm |
換向器直徑Commutator diameter | ≤Φ40mm |