概述 該閥結構設計新穎,流通面積大,流阻小,開啟度大,節電,密封性能可靠.耐磨損.且具有緩閉消聲的作用??筛鶕?jù)不同的水況調節優良的緩閉時間.消除水錘。主要用于給排水管道上,安裝在水泵的出口處.用以截?cái)嘟橘|(zhì)的逆流,消除破壞性水錘,保證管路、水泵的安全運行,使用壽命長、無振動、無嗓音。 | Overview This valve is featured by original structure, large circulating area,little flaw resistance, broad opening, distinguished electricity saving, de-pendable sealing performance, abrasion resistance, as well as slow shut and noise elimination. Functioned to effect optimal time for slow shut and for eliminating water hammer according to different occa-sions, this valve is mainly used in water supply and drainage pipeline and mounted at the outlet of pump to cut off backflow of medium, e-liminate destructive water hammer, ensure the safe operation of pipeline and pump, and actualize long service life, little vibration and noise. |
結構示意圖Structural Diagram | 安全示意圖Install the sketch map |
主要性能參數Main Performace Parameters
型號 Type | 公稱壓力 PN(MPa) | 試驗壓力Ps(MPa) | 工作溫度(℃)Working Temperature(℃) | 適用介質 Applicable Medium | |
殼體Shell | 密封Seal | ||||
H 10 Hh44X/Z-16 T 25 | 1.0 | 1.5 | 1.1 | ≤80(根據客戶要求可達到200) Can be up to200 according to customer’s enquiry | 水、污水、海水等 Water,sewage, Sea water,etc. |
1.6 | 2.4 | 1.76 | |||
2.5 | 3.8 | 2.8 |
主要零件材質Main Parts and Materials
零件名稱 Name | 閥體、閥蓋 Valve Body Bonnet | 閥瓣 Disc | 閥桿 Valve Stem |
材料 Material | 灰鑄鐵、鑄鋼 Casting iron Casting steell | 鋼板+橡膠組件 Stencil plate+ Rubber package | 不銹鋼 Stainless Steel |