北京艾諾德儀器有限公司，致力于打造中國儀器航母品牌。
電壓擊穿試驗儀
電壓擊穿試驗儀-微機控制
DDJ-150KV(15萬伏)
滿足標準：GB1408-2006 絕緣材料電氣強度試驗方法
GB/T1695-2005 硫化橡膠工頻電壓擊穿強度和耐電壓強度試驗
GB/T3333 電纜紙工頻電壓擊穿試驗方法
HG/T 3330絕緣漆漆膜擊穿強度測定法
GB12656 電容器紙工頻電壓擊穿試驗方法
ASTM D149 固體電絕緣材料在工業電源頻率下的介電擊穿電壓和介電強度的試驗方法.
一、電壓擊穿試驗儀
適用范圍及功能
主要適用于固體絕緣材料（如：塑料、橡膠、層壓材料、薄膜、樹脂、云母、陶瓷、玻璃、絕緣漆等絕緣材料及絕緣件）在工頻電壓或直流電壓下?lián)舸?qiáng)度和耐電壓的測試。
本儀器由電腦控制，是我公司自主研發的全新第二代介電擊穿檢測儀器，本儀器電子控制系統是通過西門子PLC控制，數據采集方式通過光電隔離，有效解決試驗過程中的抗干擾問題，軟件操作使用方便，能夠?qū)崟r(shí)顯示動態曲線，同時升壓速率無級可調，可以根據自己的需要進行升壓速率調節，調節范圍在10V-5000V/S，處于國內地位（國內*能達到此功能的廠家），使升壓速率真正做到勻速、準確，并能夠準確測出漏電電流的數據?？蓪?shí)時繪制試驗曲線，顯示試驗數據，判斷準確，并可保存，分析，打印試驗數據。
本系統能夠自動判別試樣擊穿并采集擊穿電壓數據及泄露電流，同時能夠在擊穿的瞬間電壓迅速降低自動歸零。軟件系統操作方便，性能穩定，安全可靠。
二、電壓擊穿試驗儀
軟件功能:
01、軟件平臺：WINDOWS窗口操作平臺，界面直觀，便于操作
02、曲線顯示：在實驗過程中可以動態顯示試驗曲線
03、數據導出：可以對試驗結果導入EXCEL表格
04、實驗報告：可以人為設置報告名稱，并對實驗報告進行打印
05、試驗方式：可以根據需求對直流試驗和交流試驗進行靈活選擇
06、試驗方法：可以根據需求自行選擇擊穿電壓、耐壓試驗、梯度試驗
07、參數設置：可以根據不同的試驗方式及試驗方法靈活設置所需的不同參數值
08、試樣設置：可對不同標準的試樣參數靈活設置
09、人員管理：設置用戶名及密碼，不同的操作員登入進行不同的試驗，互不影響
10、標準選擇：含有不同標準，可根據需求自行選擇
11、連續操作：連續操作試驗時，可直接在軟件里開始試驗，進行二次試驗
三、電壓擊穿試驗儀
技術要求：
01、輸入電壓： 380 V
02、輸出電壓： 交流 0--150 KV ;
03、電器容量： 20KVA
04、高壓分級： 0--5KV； 0-10KV； 0--20KV；0--50KV；0—100KV；0—150KV
05、升壓速率：升壓速率： 10-5000V，
（在此區間內可以手動設置，目前國內*能達到此功能的儀器）
06、試驗方式：
直流試驗：1、勻速升壓 2、梯度升壓 3、耐壓試驗
交流試驗：1、勻速升壓 2、梯度升壓 3、耐壓試驗
07、判停方式兩種：1、電壓判停 2、電流判停
08、電壓電流采集方式：光電隔離采集，有效保證控制系統的安全性和可靠性。
09、試驗介質：空氣，試驗油
10、安裝靈敏度較高的過電流保護裝置保證試樣擊穿時在0.05S內切斷電源。
11、采用*智能集成電路勻速調壓。
12、支持短時間內短路試驗要求。
13、電壓試驗精度： ≤ 1％。
14、試驗電壓連續可調： 0--100 KV。
15、電流可采集到m*
16、電極規格：
1、片材電極 ￠25mm 兩個 片材電極 ￠75mm一個
2、漆包線電極 兩個
3、管用電極 兩個
17、主機尺寸：長寬高-2100*1650*2500（MM）
18、操作臺尺寸：長寬高-2100*1500*1200（MM）
19、防護罩材質：白色透明有機玻璃
20、油槽尺寸：長寬高-300*200*150
21、設備重量：約500KG
四、安全保護：
本儀器具有比較完善的安全防護措施：
本試驗儀器電路保護控制：
（1）超壓保護 （2）過流保護 （3）短路保護 （4）漏電保護 （5）軟件誤操作保護
五、試驗方式
1、絕緣試樣空氣中試驗
2、絕緣試樣浸油中試驗
六、試驗界面：
1、試驗主界面截圖
2、參數設置界面截圖：
3、打印預覽界面截圖
七、設備主要配置
設備標準配置
序號 名稱 配置 備注
01 試驗主機 一臺
02 控制裝置 一套
03 試驗電極 二套（三只）
04 試驗油箱 二只
05 放電系統 一套
06 控制系統 一套
07 數據采集系統 一套
08 試驗軟件 一套 安裝盤
09 計算機 一套 聯想品牌
10 噴墨打印機 一臺 佳能品牌
11 產品使用說明書 一份
12 保護電阻 一個
13 *計量證書 一份
13 產品合格證 一份
Microcomputer control of voltage breakdown testing instrument
DDJ-150KV (150000 volts)
To meet the standard: Test methods for electrical strength of insulatingmaterial GB1408-2006
GB/T1695-2005 vulcanized rubber power frequency voltage breakdown strength and voltage withstand strength test
GB/T3333 cable paper power frequency voltage breakdown test method
HG/T 3330 insulating paint breakdown strength determination
GB12656 capacitor paper power frequency voltage breakdown test method
Test method for materials at commercial power frequencies the dielectric breakdown voltage and dielectric strength of ASTM D149 solid electricalinsulation.
One, the scope and function
Mainly applicable to solid insulation materials (such as: plastic, rubber,lamination material, film, resin, mica, ceramic, glass, insulating paint and other insulation materials and parts) in the frequency of the voltage or DC voltage breakdown strength and voltage withstand test.
The instrument is controlled by computer, is my company developed a new second generation dielectric breakdown testing instrument, the instrumentis controlled by the electronic control system of Siemens PLC, data acquisition through a photoelectric isolation, effectively solve the problem of interference in the process of software test, convenient operation and use, to show the real-time dynamic curve, at the same time, the rate of pressure rise stepless adjustable, can according to their own needs toboost rate adjustment, adjustment in the range of 10V-5000V/S, in the domestic leading position (the only domestic manufacturers can achieve this function), so that the pressure rate truly uniform, accurate, and can accuray measure the leakage current data. May the real-time renderingcurves, test data show that, to judge accuray, and can save, print the test data analysis.
The system can automatically determine the sample breakdown andbreakdown voltage and leakage current data acquisition, and can rapidly reduce the auto zero in instantaneous voltage breakdown. The softwaresystem is easy to operate, stable performance, safe and reliable.
Two, the software function:
01, the software platform: WINDOWS windows operating platform, intuitive interface, easy operation
02, curve display: during the experiment can dynamically display the test curve
03, export data: the results of test can be imported into EXCEL table
04, the experiment report: can be artificially set report name, and print thetest report
05, test mode: can flexibly select the DC test and AC test according to the demand of
06, test method: you can choose the breakdown voltage, voltage withstand test, gradient test according to the demand of
07, setting of parameters: according to the different parameters in different ways and test methods flexibly set the required value
08, sample setting: can the sample parameters of different standard flexiblesettings
09, personnel management: set the user name and password, different operators in different test, do not influence each other
10, the standard choice: containing different standard, according to theirneeds
11, continuous operation: continuous operation test, can directly start testin the software, test two times
Three, the technical requirements:
01, the input voltage: 380 V
02, the output voltage: AC 0--150 KV;
03, electrical capacity: 20KVA
04, high grade: 0--5KV; 0-10KV; 0--20KV; 0--50KV; 0 100KV; 0 150KV
05, the rate of pressure rise: pressurization rate: 10-5000V,
(in this interval can be set manually, currently the only can achieve thefunction of the instrument)
06, test methods:
DC test: 1, 2, 3 speed boost pressure gradient, pressure test
AC test: 1, 2, 3 speed boost pressure gradient, pressure test
07, to stop two kinds of methods: 1, voltage, current judge sentenced 2 stop stop
08, the voltage and current acquisition mode: photoelectric isolationacquisition, effectively ensure the safety and reliability of the control system.
09, the test medium: air, oil test
Over current protection device 10, the installation of high sensitivity to cut off the power supply to ensure the sample breakdown in 0.05S.
11, the use of advanced inligent integrated circuit uniform pressure.
12, support for a short time short-circuit test requirements.
13, voltage test accuracy: ≤ 1%.
14, the test voltage is continuous and adjustable: 0--100 KV.
15, the current can be collected to class mA
16, electrode size:
1, the sheet electrode - 25mm two - 75mm a sheet electrode
2, enameled wire electrode two
3, work two electrodes
17, host size: length and width and height of -2100*1650*2500 (MM)
18, operation table size: -2100*1500*1200 long width height (MM)
19, the protective cover material: white transparent organic glass
20, the oil groove dimensions: length width height -300*200*150
21, weight: about 500KG
Four, security protection:
The instrument has the advantages of safety protection measures areperfect:
The test instrument circuit protection control:
(1) the overpressure protection (2) overcurrent protection, short-circuit protection (3) (4) (5) leakage protection misoperation of protection software
Five, test methods
1, insulation test samples in air
2, insulation test specimen immersed in
Six, test interface:
1, test interface
2, the parameter setting interface:
3, the print preview screenshots
The main configuration, equipment seven
Equipment standard
Name configuration note
The 01 test a host
02 a set of control device
03 the test electrode two (three)
The 04 test tank two
The 05 discharge system
06 a set of control system
07 data collection system
A set of 08 test software installation disk
09 a Lenovo computer
The 10 one ink-jet printer Canon brand
11 using a manual
12 protective resistance a
A 13 national level measurement certificate
13 product certificate
會員1.png)