1-K3607放大器        1-K3607放大器          

1-K3607        1-K3607       1-K3607

K3607 - Calibration unit

K3607 標定設備 可以用于標定測量鏈或測量放大器,而無須施加機械量在傳感器上.
因此,設備上有采用星形連接的高精度電阻,模擬 350-Ω 應變計 全橋傳感器. 內置的電阻有極低的電容,電阻的精度等級為 0.025.
當連接放大器時, K3607 可以采用 6線 電路來減少長電纜帶來的影響.

• Suitable for simulating output signals of 350ohm strain gage fullbridge transducers
• 30 calibration signals between 0.05mV/V and 10mV/V
• Absolute zero point stability with equivalent star circuit
• Suitable for transducers supplied with DC voltage and carrier frequency up to 5kHz
• application for many measuring chains