品牌：TI

型號：TPS63020DSJR

封裝：QFN14

包裝：3000

年份：1401+5

數量：900000

德州TI 大陸*代理商.

深圳市億威盛世科技有限公司

：徐波

：

:

所屬類別：通信電路

產品種類: 開關變換器、穩壓器與控制器

封裝：QFN

處理信號：數字信號

導電類型：雙極型

制作工藝：半導體集成

工作溫度：-40°C~ 85°C

電壓：1.2V ~1.5V

電流輸出：3A

規格尺寸：5 (mm)

靜態功耗：5（mW）

開關頻率：2.4MHz

數據列表TPS63020,21

產品相片TI Buck/Boost 3A

產品培訓模塊TPS63020 Overview

設計資源Create your power design now with TI’s WEBENCH Designer

特色產品TPS63020 Buck-Boost CONVERTER

參考設計庫TPS63020EVM-487: 3.3V @ 1A, 1.8 ~ 5.5V in

制造商產品頁TPS63020DSJT Specifications

標準包裝3000類別集成電路 (IC)家庭PMIC - 穩壓器 - DC DC 開關穩壓器系列-包裝帶卷TR類型降壓（降壓），升壓（升壓）輸出類型可調式輸出數1電壓 - 輸出1.2 V ~ 5.5 V電壓 - 輸入1.8 V ~ 5.5 VPWM 類型電流模式頻率 - 開關2.4MHz電流 - 輸出3A同步整流器是工作溫度-40°C ~ 85°C安裝類型表面貼裝封裝/外殼14-VFDFN 裸露焊盤供應商器件封裝14-VSON （4x3）配用

TPS6302x是TI 公司的高效小型升降壓電源解決方案,輸入電壓從1.8V到5.5V,輸出電流可高達3A,固定和可調輸出電壓從1.2V到5.5V,效率高達96%,能在降壓和升壓模式自動轉換,靜態電流小于50uA,固定工作頻率2.4MHz,可用于所有兩節和三節堿性電池, NiCd 或NiMH或單節鋰電池供電的設備,超小型移動PC和MID,數碼媒體播放器,DSC和攝像機.本文介紹了TPS6302x主要特性,方框圖, 可調輸出電壓典型應用電路圖以及TPS63020EVM評估板特性,電路圖和材料清單(BOM).

The TPS6302x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 3A while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to 2.5V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-

modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 4A. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 14-pin QFN PowerPAD packagemeasuring 3 × 4 mm (DSJ).TPS63020主要特性:

Up to 96% Efficiency

3A Output Current at 3.3V in Step Down Mode (VIN = 3.6V to 5.5V)

More than 2A Output Current at 3.3V in Boost Mode (VIN > 2.5V)

Automatic Transition Between Step Down and Boost Mode

Dynamic Input Current Limit

Device Quiescent Current less than 50A

Input Voltage Range: 1.8V to 5.5V

Fixed and Adjustable Output Voltage Options from 1.2V to 5.5V

Power Save Mode for Improved Efficiency at Low Output Power

Forced Fixed Frequency Operation at 2.4MHz and Synchronization Possible

Smart Power Good Output

Load Disconnect During Shutdown

Overtemperature Protection

Overvoltage Protection

Available in a 3 × 4-mm, QFN-14 Package

TPS63020應用:

All wo-Cell and Three-Cell Alkaline, NiCd or NiMH or

Single-Cell Li Battery Powered Products

Ultra PC’s and Internet Devices

Digital Mdia Players

DSC’s and CamcordersTPS63020EVM

The TPS63020EVM evaluation module (EVM) is designed to help the user easily evaluate and test the operation and functionality of the TPS63020. This user’s guide includes setup instructions for the hardware, a schematic diagram, a bill of materials, and printed-circuit board layout drawings for the evaluation module.

TPS63020EVM

The TPS63020EVM evaluation module (EVM) is designed to help the user easily evaluate and test the operation and functionality of the TPS63020. This user’s guide includes setup instructions for the hardware, a schematic diagram, a bill of materials, and printed-circuit board layout drawings for the evaluation module.

TPS63020EVM

The TPS63020EVM evaluation module (EVM) is designed to help the user easily evaluate and test the operation and functionality of the TPS63020. This user’s guide includes setup instructions for the hardware, a schematic diagram, a bill of materials, and printed-circuit board layout drawings for the evaluation module.