產品名稱：人輪狀病毒抗體（RV-Ab）ELISA檢測試劑盒
英文名稱：human RV-AbELISA Kit
貨號：ZK-H1719
規格： 96T/48T
有效期： 4 個月(4℃)；8 個月（-20℃）。 
保存方法： 2-8℃（頻繁使用時）; -20℃（長時間不用時）。 
服務：子科生物所有的elisa試劑盒均可免費代測，全程Elisa實驗技術指導；

實驗說明：
1．試劑盒保存：-20℃（較長時間不用時）；2-8℃（頻繁使用時）。
2．濃洗滌液低溫保存會有鹽析出，稀釋時可在水浴中加溫助溶。
3．中、英文說明書可能會有不*之處，請以英文說明書為準。
4．剛開啟的酶聯板孔中可能會含有少許水樣物質，此為正?，F(xiàn)象，不會對實驗結果造成任何影響。

人輪狀病毒抗體（RV-Ab）ELISA檢測試劑盒
實驗操作注意事項
1.試劑準備：所有試劑都必須在使用前達到室溫，使用后請立即按照說明書要求保存。實驗操作中必須使用一次性吸頭，避免交叉污染。
2．加樣：加樣時，要控制加樣速度，避免*孔與zui后一孔之見的時間間隔過大，否則將會導致不同的預孵育時間，從而影響實驗的準確性以及重復性；一般加樣時間控制在10分鐘內，如果樣本數量過多，可使用多道移液器。
3.孵育：樣品要在密閉的容器內進行孵育，嚴格按照說明書上規定的孵育時間和溫度進行。
4.洗滌：洗滌過程中反應孔中的殘留的洗滌液應在濾紙上充分拍干，同時要消除板底殘留的液體和手指痕跡，避免影響zui后的酶標儀讀數。
5.反應時間的控制：加入底物后請定時觀察反應孔的顏色變化(比如，10分鐘左右)，如果顏色較深，請?zhí)崆凹尤虢K止液終止反應。
6.建議實驗前預測樣品含量，如樣品濃度過高，應對樣品進行稀釋，計算結果時乘以相應的稀釋倍數。
7.建議使用本試劑盒時先做預實驗(即先做標準曲線，試用幾個標本)，如果對本試劑盒有任何疑問，可和所購經銷商，如果因運輸過程導致試劑盒失效，可要求調換，但概不承擔產品本身以外的任何損失。

679291    ipsogen MLL-ELL e8e2 Standards    
203209    HotStarTaq DNA Polymerase (25000)    "HotStarTaq DNA Polymerase Kit (25000)
100 x 250 units HotStarTaq DNA Polymerase, 100 x 1.2ml HotStarTaq Buffer, 100 x 2.0ml Q-Solution, 100 x 1.2ml MgCl2
Old SAP # 1009302"
200201    TopTaq DNA Polymerase (50)    "For highly reliable end-point PCR with unrivalled ease-of-use

The first fridge storage enzyme"
180211    GeneRead rRNA Depletion Kit (6)    
159315    Multibarrier Pouch Small (100)    
158908    Cell Lysis Solution (1000 ml)    
677513    ipsogen NPM1 mut A MutaQuant Kit (24)    
35023    Ni-NTA HisSorb Strips (24)    2 racks of 12 x Ni-NTA-coated 8-well strips in 96-well format
34450    RGS.His HRP Conjugate Kit    125 ul RGS-His HRP Conjugate, 5 g Blocking Reagent, 50 ml Blocking Reagent Buffer (10x concentrate)
30971    Glutathione HiCap Cartridges (5 x 1 ml)    
9238853    BR M48, Basic Agreement    The Basic Cover Agreement M48 provides full service coverage for the BioRobot M48. Costs for service visits are fully covered including travel, labor, and parts. The agreement also includes one annual preventive maintenance visit, with costs for labor and parts covered. With a Basic Cover Agreement, the response time is 5 working days.
9241214    Full Agreement Depot Repair, Heater, 1yr    "The Full Agreement Depot Repair, Heater provides full service coverage for the microplate heater used in the digene HPV application. The service is conducted as an instrument exchange service. 
All shipping, labor and repair part costs related to an instrument exchange are included for 1 year. Instrument exchange time is 2 - 3 working days."
9241188    Gauge, pressure, rear, QX    
9238826    Plate holder    
9238814    Rect. carrier for 20 glass tubes 7 ml    
9233426    Capillary, dispenser head, BR8000 (8pcs)    
9233274    H-motor Plato 1***    
9237147    Optics Platform with Green LSR    
9237127    Upgrade App., RNeasy 96 BR3000/9604    
9237120    Upgrade App., QIAwell Ultra    
9237118    Upgrade App., DT Sequencing Setup    
9237092    Training, BR On-site Advanced    "The On-Site QIAGEN BioRobot Systems Advanced Training includes all travel and labor costs for up to three days of on-site training to introduce users to advanced software topics for the  QIAGEN BioRobot System users with a basic understanding of the use and programming of QIAGEN BioRobot 
systems who want to write complex protocols for their instrument, the advanced training starts with a brief review of basic concepts such as teaching slots and racks before exploring the higher-level programming features of the QIAsoft Operating System. Topics include the structure and use of functions, using variable for programming flexibility, IF/ELSE/END boolean logic commands, and parameterized pipetting using tables.  Users will write, test and run protocols they have developed to demonstrate and reinforce training success."
9236358    Sample Holder Small, 1.2ml    
9232928    Nut, Probe Holder, BR8    
9236354    Rear Air Filter    
9236348    62mA fuse sensor distribution Board    
9236323    Pinch Valve    
9236239    Elution Microtube Adapter, Type B    Elevating platform for use with Elution Microtubes
9236161    Lubricant, pressure grease, RapidPlate    
9235962    Used tip slide 2.02    
9235791    Spring, Coach, Drawer, BR8 RD    
9235703    Arm Cable, Flat, RCS1    
9235294    Seal, rotary shaft, 10 x 16 mm    
9235161    Zylinderstift rostfrei 2 h8 x25    
9230253    Rack for reagents, Universal (zig-zag)    
9022779    PyroMark Q24 Advanced Software    
9235105    Manual, user, hardware BR8000 Int    
9234863    Washer liquid container (9l Nalgene)    
9238670    Wedge belt 5 x 513    
9238648    Motorized lock with optic, right    "For Sigma centrifuge
Motor that controls the locks
Includes optical sensor"
9238640    Tachogenerator    
9242058    Tube insert, 13 mm, R, sample carr., Qsy    
9241809    Pyro Q96 MDa, Installation    Installation and Introductory Training PyroMark is an on-site service, conducted by a QIAGEN Service Specialist. It covers the installation and commissioning of the instrument and the handling of the PyroMark systems hardware. It trains the user on the operation of the PyroMark software and the setup and execution of a pyrosequencing run. After the training the user will be able to prepare samples, set-up and run the instrument, analyse the results and design new assays as well as troubleshoot new assays and perform basic maintenance on the sample preparation tool and instrument. All travel and labor costs and well as material for the demonstration run are included. The service is documented in accordance with GMP/GLP requirements
9241162    Board, transport conversion, QX    
9241146    RS232 Board, Eppendorf, AP196/98    
9240993    Calibration Plate, MDD    
9240962    PCB, connector, pipetting system, Qsym    
9240959    Activation bar tip, handler, Qsym    
9240948    Cable, x, portal, Qsym    
9240825    Field Upgrade, BR EZ1 DSP    
9240817    #Premium Cover Agreement EZ1 DSP, 1YR    "Repair service delivery: onsite
Service response time (repair): 24 working hours/1 business day
Periodic inspection/maintenance: yes, 1/agreement year
Inspection/maintenance delivery: onsite
Cost coverage for repair parts: yes, included
Cost coverage for labor: yes, included
Cost coverage for travel: yes, included
Replacement system (Loaner) provision: not included
Transportation cost coverage: not applicable"
9240776    Dispense Head Update, AP96    
9022763    EZ1 Adv. XL DNA Invest. Flip-Cap Card    
6000-5012    Lumicheck Battery Replacement Package