德國力特LIT進口膜片式電磁閥
進口膜片式電磁閥,進口不銹鋼膜片式電磁閥,進口黃銅膜片式電磁閥,進口法蘭膜片式電磁閥,進口內螺紋膜片式電磁閥
LIT力特『進口膜片式電磁閥』詳細介紹●LIT電磁閥系列●LIT膜片電磁閥●產品數據
?進口膜片式電磁閥描述--
LIT膜片電磁閥是一種先導式結構的電磁閥,采用特殊密封結構和合成橡膠密封無泄漏,工作平穩噪音低,無水錘沖擊,本產品廣泛用于各種純凈氣體流體、空氣、自來水、瓦斯、煤氣、柴油、低壓蒸汽、熱水管路的自動控制;
LIT diaphragm solenoid valve is a leading structure of the electromagnetic valve. It is widely used in the automatic control of all kinds of pure gas fluid, air, water, gas, gas, gas, gas, gas, gas, gas, low pressure steam and hot water pipeline with special sealing structure and synthetic rubber seal without leakage, low noise and no water hammer impact.
?進口膜片式電磁閥控制方式--
1.常 閉 型:斷電關閉,通電打開;
2.常 開 型:斷電打開,通電關閉;
?進口膜片式電磁閥特點--
采用膜片式特殊密封結構,動作靈敏
線圈耐溫180℃,可持續通電
結構簡單,體積小,封密性能好
不易燒毀,性能穩定;
?進口膜片式電磁閥參數--
動作方式:先導式
接口尺寸:G1/4~G2
工作壓力:1.6MPa
適用介質:中性,氣態或液態流體
介質粘度:≤21mm²/s
介質溫度:-10~+80℃(+130℃,可選)
環境溫度:-10~+50℃
閥體材質:黃銅或不銹鋼
密封材質:NBR(標準),F(xiàn)PM、EPDM(可選)
標準電壓:AC:220V(50/60HZ)/DC:24V
防護等級:IP65