有源探頭| P6205 The P6205 probe is part of Tektronix' line of Low Circuit Loading Signal Acquisition probes for CSA (Communications Signal Analyzers), DSA (Digitizing Signal Analyzers), 11000 Series and
有源探頭| P6205
產(chǎn)品說明:
有源探頭| P6205
- DC to 750 MHz
- 2 pF Input C
- 1 M? Input R
- Integral Probe Power TekProbe™ BNC
Applications
- High-speed Digital Systems Design
- ECL
- GaAs
- MOS: CMOS; FastCMOS; BiCMOS; TTL
- Component Design/Characterization
- Amplitude Levels
- Aberrations
- Propagation Delay and Timing
- Bandwidths and Rise Times
- Educational Research
- Manufacturing Engineering and Test
Active FET Probes for TekProbe™ BNC Interface
The P6205 probe is part of Tektronix' line of Low Circuit Loading Signal Acquisition probes for CSA (Communications Signal Analyzers), DSA (Digitizing Signal Analyzers), 11000 Series and the TDS family of oscilloscopes.
The P6205 is designed with FET devices for its inputs, which allows very high input resistance values and low input capacitances.
Both Active FET probes provide a wide linear dynamic input range for accessing most digital device families using today's logic voltage levels.
Power for the P6205 is supplied by the CSA, DSA, TDS and 11000 Series mainframes through the TekProbe BNC Interface, eliminating the need for extra cabling and/or external power supplies.
Probe information such as type, serial number, attenuation factor, offset scale factor, input resistance, and termination resistance required is communicated through the TekProbe interface between the Active Probe and the CSA, DSA, and 11000 Series mainframes. This information is used by these oscilloscope mainframes during the scope initialization sequence and measurement analysis.